Three Vital Air Compressor Safety Guidelines

Do you have or have a friend who has an air compressor? These units are traditionally used in lots of industrial settings and manufacturing services, and also are located in residential homes and small businesses where they are utilized to inflate vehicle tires and operate air power equipment. The absence of regular maintenance and inspection of air compressors often accident took place.

The phrase “air compressor” is normally utilized to identify the compressor motor along with the air receiver tank. However, formally the air compressor is the motor that compresses air, generally placed on the surface of a vertical, or horizontal air receiver. The compressor motor needs service and maintenance -- go through manufacturer's needs.

Below are a few things you require to understand in case you have an air compressor unit set up in your organization or home:

Drain air receiver tank regular

Water is a normal by-product of compressed air. It usually forms within the tank. The condensation that forms within the tank needs to be drained daily to avoid the buildup of condensation. Water kept undrained in a pressure vessel can cause rust and probable early failure or, at worst, devastating failure from a damaged tank bottom. Owners should consider adding a timed automatic drain so daily draining takes place routinely.

Check out regularly

When draining built-up condensation, successfully examine the fluid getting drained. Rusty, scaly water is a positive symptom of active corrosion. If inside corrosion is suspected, take away the vessel from service, take out a plug or fitting from the tank, and confidently examine the inner shell and head areas. The view is restricted and a borescope examination camera may be needed. Outside the body, connection welds obtaining the compressor motor and saddle as well as leg supports must be checked for any early indications of vibration-induced cracking. The tank shell and heads must also be free from any physical damage.

Check pressure release valves

The pressure release valve, that protects the air receiver from being over-pressurized, may be compromised through dirt, oil, and other pollutants so it should be regularly examined and tested. Every vessel must have a nameplate that information the highest allowed functioning pressure. Make sure the fixed pressure of the safety valve does not surpass that permitted on the vessel nameplate and ensure that the capability of the safety valve is larger than the capacity of the air compressor.

Important thing?
Air compressor tanks may look great on the exterior, but hidden inside damage can cause critical risks. If uncertain, switch your unit. When changing units, always dispose of them appropriately.



View more here: An Ideal Guide to Sizing The Air Receiver Tank

Read more: Promec Engineering Pty Ltd

How The Australian Steel Industry Reacts With COVID-19

Australia continues to carefully monitor the outbreak of coronavirus (COVID-19). Cases of the COVID-19 virus are increasing in Australia, and the situation is changing fast. You can get up to date information from australia.gov.au.

According to a special Roy Morgan Snap, SMS Survey in the middle of March over 60% of Australian businesses report being affected by the COVID-19 coronavirus, and 78% of manufacturing industries have been affected particularly difficult by the virus.

Safe Work Australia advises every workplace what to do to maintain workers safe at their workplace and reduce the chance of exposure to COVID-19 in the workplace.

• If possible permit workers to work from home.
• Maintain physical distance with a minimum of 1.5 meters among workers.
• Maintain the practice of good hygiene, inspire all workers to regularly wash their hands for a minimum of 20 seconds with water and soap or utilizing hand sanitizer.
• Understand how to identify COVID-19 symptoms like fever, cough, sore throat and shortness of breath.
• Make sure workers do not come to work when they are sick to ensure that your workplace is regularly cleaned and sanitized.
• Get signs and posters around the workplace to remind workers as well as others to understand the hazards of COVID-19, and it is essential to prevent its spread.

Australian Steel Institute (ASI) announces an update on business activities in the Australian steel industry in this situation. The key steel companies have confirmed that their supply chains are operating normally.

To stop the spread of COIVD-19 the steel industry already procedures very high standards of hygiene to protect all employees from schedule work safe practices risks. These procedures have been galvanized and heightened because of the outbreak of the COVID-19 pandemic.

The Australian steel industry is more than willing to perform its part in containing COVID-19. Australian steel manufacturers have already released this procedure to protect their workers:

• Steel manufacturers along with other services like steel fabrication have introduced strict entry processes, such as screening for COVID-19 exposure and examining the temperatures of workers.
• Stricter than normal hygiene methods, use heightened, more repeated, and deeper cleaning.
• Review of amenities to make sure social distancing rules are stringently followed, such as keeping 1.5m among workers always and the reduction of overlapping shifts.
• Stringent return to work practices post-travel and where a worker feels sick, such as self-isolation.
• Prepare remote working plans for non-essential workers.
• Increased communications around all hygiene steps to help make sure workers, service providers, and supplier compliance.
• Implement of in-depth processes to control the COVID-19 exposure case.

A Short Overview of Pipe Fabrication Tools

In the process of pipe fabrication, the fabricator uses various specialized tools to achieve excellent outcomes. With the proper dies for each pipe size, one can bend round pipe, pipe and block piping. Trying to bend by hand can be very challenging and will usually result in poor bends, curve pipe and is difficult to duplicate. This makes professional pipe fabrication tools essential.

Different types of tools are used throughout Piping Fabrication activities.

Here is a list of most of such tools utilized in the fabrication industry.

Pipe Bending

Pipe bending is a vital part of the pipe fabrication process. Manual and automated pipe benders are available. Based on the expected results and budget, you can choose the type of product for use.

Pipe Cutting

Using a pipe cutting, machine one can cut any shape on a pipe very properly. Pipe cutting machines enable you to understand difficult contacts on a large range of pipe sizes.

Pipe Notcher

These tools are utilized to offer clean cuts when notching pipes to join them to each other. The exactness and fit up the notchers offer to ensure an expert look.

Pipe Rolling

Similar to pipe bending rolling is a manufacturing process that makes bend and curve designed metal pipes.

Pipe Vises

Vises are utilized to hold the pipe in position when they are getting fabricated.

Welding Machine

The welding machine is utilized to weld two piping parts jointly utilizing high ampere electricity and welding sticks.

Chain Block

Chain block may lift load 30 times of pulling force place on lifting chain with aid of internal gears.

Grinder

Grinders are utilized to remove rust from pipes and fittings ends before welding so that no flaws happen in welds.

Pipe Clamp

Pipe clamps are utilized to hold pipes properly for several purposes such as cutting, threading or welding.

Understanding the various benefits and limitations of the tools will allow you to use them in a way that ensures maximum effectiveness. A fabricator needs to understand the tools to leverage the correct one for the ideal performance. Therefore, this information should help fabricator in utilizing and purchasing the right tools for pipe fabrication activities.

5 Safety Tips For Steel Fabrication Organization

Every steel fabrication organization worth their mettle knows the necessity of workplace safety.
Having a safe working place is vital from a health and welfare view and it’s important to take all useful steps to reduce the risk of injury to workers on-site, but there are lots of other difficulties that are affected by workplace safety.

Questions of safety can negatively effect on productivity and can result in higher costs, a decrease of a good reputation, financial penalties and possible lawsuit in case of a workplace injury, unsatisfied staff and the possible loss of clients - so it’s vital that steel fabricators set workplace safety on the top of their daily activities.

The legal structure given by the Occupational Health and Safety Act 2004 as well as some other resources build by government and industry bodies like WorkSafe Australia provide clear instruction on managing risk in the workplace, but if you’re looking a simple overview of safety tips for a steel fabrication business, here are five important things you need to think about.

Apply Safety Methods

Safety measures must apply for the safe operation of the steel fabrication process. It will also ensure that OH&S requirements fulfill. If safety methods put in place and workers informed about theses measure, they are less inclined to maintain an injury at work.

Applying these methods can decrease injuries and provide for the safety of workers. It increases production procedures, and it raises the effectiveness and efficiency of workers. Applying safety methods also benefits an organization it that it helps them maintain their professional certifications.

Correct Training

Before a worker starts working in a steel fabrication workshop, they must have the correct training and certifications necessary to properly carry out their responsibilities. When a worker holds a welding certification, they are experienced and understand how to properly weld without getting injured.

If a worker correctly trained, they will be happier with their work, and they will be proud of their achievements. Training may also result in an improved quality of work and higher efficiency. The worker will be more productive when assessing the entire job efficiency. As an example, a welder who possesses MEM05046B - Perform welds to code standards using manual metal arc welding process.

Reduce Back and Neck Injuries

Reducing major injuries like back and neck injuries saves the company funds and downtime. Workers should receive training in the correct method to use when moving heavy materials and items. If workers trained to use their legs muscles, not their back or neck when moving, fewer injuries will happen.

Use Protective Dresses

steel fabrication workers must always use protective outfits. They should get them to use, all essential, protective clothing to cut down on the chance of sustaining injuries.

Workers should put on long-sleeved shirts, long pants, safety gloves, safety glasses, and a hard safety helmet when working with steel. Appropriate safety shoes are also essential. Loose-fitting dresses and jewelry must not be in this type of atmosphere.

Supervisors should make sure that adequate equipment is accessible to workers. Each worker must use the proper protective outfits essential for the work at hand. If respiratory equipment is necessary it should fit properly, fit well, and the worker trained in its application. The proper protective outfits and safety equipment is essential for the well-being of workers.

Appropriate Tool Utilization

The vital thing a worker should do before applying steel fabrication tools is to read the guidelines and learn the optimal way to use every tool. Improper use of a tool may cause major injuries.

First of all, a worker should be well-trained to use the tools and safety methods to avoid injuries. Before using a tool it must be completely checked to make sure it is in ideal condition.

When using big machines, workers must ensure the machines are working properly. Machines should be completely checked before every use.

Workers should not put on dresses or accessories that may get captured in the machine and result in injuries. They must not touch the steel when it comes out of a machine since it will be hot.

The safeguards and safety measures of the equipment must be utilized. Make use of these features routinely and understand the right way to utilize them.

Essential Safety Methods

Safety is a vital matter in steel fabrication due to the difficulty of the manufacturing process. By ensuring that well-trained workers know every aspect of each job along with the tools and machines in the steel fabrication process, the chance of injuries will be reduced in the steel industry and other related features.

View more: Role of Structural Steel Fabricators in The Construction Industry

An Ideal Guide to Sizing The Air Receiver Tank

What Is an Air Receiver Tank?

Compressed air systems depend on air receiver tanks to cool air and eliminate water from the system. Air receiver tanks also work as short-term reservoirs throughout top demand. While an air compressor does not require an air receiver tank to perform effectively, having one allows it to run more properly.

Why do you require an air receiver?

Your air compressor set up can in idea work without having a receiver, however, not having one in the air system can boost the loading and unloading methods on the compressor creating the compressor work difficult. It is essential to keep in mind that load/unload methods rely on the demand variation within your facility.

Air receivers, known as vessels or tanks are utilized to keep compressed air before it goes into the piping system as well as equipment. In basic words, air receivers work as a load system among the compressor and the varying pressure due to the varying demand.

A few air compressors are often "tank-mounted" so that they come like a system and are installed on top of the air receiver. This kind of set-up is very popular at facilities where space comes limited. Having a tank installed compressor can save on the two space along with preliminary set up expenses related to commissioning a stand-alone dryer. This is normally viewed with minor range compressors, mostly as much as 26kW or 35 HP. Bigger air compressors are not ideal for tank installed selection, because they become top large and may create a safety possibility.

The way to appropriately size air receivers?

Several aspects control the air receiver tank factor, which includes air tank capability and air receiver tank size. Most important, you should think about your chosen air tank compressor’s capability to properly integrate along with your present systems. Here are the four key factors that need consideration during the air receiver tank choice.

Reducing Pressure Variations:

An air receiver enables you to reduce pressure variations that may have an effect on the manufacturing process and the quality of the finished product. Choosing the right air tank for the compressor needs you to keep in mind two values: the compressor's output pressure and what the system requires at the point of utilizing. Remember that the compressed air kept in the air receiver is only beneficial providing its pressure is enough for the process which utilizes it. For this reason, it is essential to think about the period (in minutes) that the air receiver can provide air at the required pressure for the final-user machines.

Meeting temporary maximum air requirements:

Almost all systems’ compressed air demands very frequently, as well as the size of the air receiver tank, should reveal these variations in requirement. An inappropriately sized tank can result in incorrect variations in pressure levels, creating pressure buildup or system failure. The air receiver tank should work as a last-minute compressed air reservoir if your system experiences a requirement increase beyond its main compressor’s capability. An incorrectly sized tank may result in a shortage in the system.

Energy Reducing:

Utilizing an air receiver can help minimize energy utilization of the compressed air system by allowing load/unload (fixed speed) compressors to function on a lengthier period and with stronger pressure bands. Getting an appropriately sized tank plus more air than is needed will lower the potential to reduce compressor opening to fulfill increased flow requirements, which may have significant savings on energy usage. This will also reduce pressure variation and repeated motor starts while providing constant pressure and increasing the life span of the compressor.

Figuring Out Air Receiver Tank Size:

Figuring out the best size for the system’s air receiver tank depends on several elements, such as the possibility of volume and pressure variances, size and capability of the compressor, anticipated temps, and the overall system. The system requires and uses elements to figure out maximum usage, and compressed air receiver tank sizes differ to allow for the requirements of a system. It is essential to understand exactly what size compressor will perform best with the system if you wish to increase the system and make sure that safety factors are addressed.

View more: Do You Require A Compressed Air Receiver Tank?